成人a毛片免费全部播放_国产精品第一区第27页_私密 无码 a字_美女视频黄的免费

永嘉渤工閥門有限公司
  英文版    中文版
Bohai Valve Co., Ltd. Yongjia
Contact: Mr. Wang
Phone 577 -57796661 / 057796662
Fax 577 -67367855
Phone: 13806833242
E-mail: 258193218@qq.com
Address: Industrial Zone Oubei Puxi
NEWS

Floating ball valve structure classification

更新時(shí)間:2018.07.20
Floating ball valve
The ball valve ball is floating, under the action of medium pressure, the ball can produce a certain displacement and press tightly on the sealing surface of the outlet end to ensure that the outlet end is sealed.
The floating ball valve is simple in structure and has good sealing performance. However, the ball bears the load of working medium and all the load of working medium is transferred to the outlet seal ring. This structure is widely used in low and middle pressure ball valves.
Fixed ball valve
The ball of the floating ball valve is fixed and does not move under pressure. Fixed ball valve with floating seat, after the medium pressure, the seat moves, so that the sealing ring tightly pressed on the ball to ensure the sealing. Bearings are usually mounted on the upper and lower shafts of the ball with small operating torque for high pressure and large bore valves.
In order to reduce the operating torque of ball valve and increase the reliability of sealing, oil seal ball valve has appeared in recent years. It can not only fill special lubricating oil between the sealing cover to form a layer of oil film, which not only enhances the sealing performance, but also reduces the operating torque. It is more suitable for high pressure and large caliber ball valve.
Elastic ball valve
The ball of the ball valve is elastic. The ball and seat seal ring are made of metal material, and the sealing pressure is very high. The pressure of the medium itself cannot meet the requirements of sealing, so external force must be applied. This valve is suitable for high temperature and high pressure medium.
The elastic sphere is obtained by opening an elastic groove at the lower end of the inner wall of the sphere. When closing the channel, use the wedge of the stem to make the ball open and the seat tight to seal. Before rotating the ball, loosen the wedge head, and the ball will return to its original shape, so that there is a small gap between the ball and the seat, which can reduce the friction and operating torque of the sealing surface.
Want to know more about floating ball valves: http:// m.sz-sport.com

今天是
HOME ABOUT US NEWS PRODUCTS NETWORK ORDER <CONTACT US 中文

Copyright 2013 Bohai Valve Co., Ltd. Yongjia LUOTUO All Right Reserved. Address: Yongjia County, Wenzhou City, Zhejiang Province town of North ICP No.: ICP 12045727 No. -1